Skip to content
Chimney Repairs · Dorset & Hampshire

ChimneyRepointing,RepairsandRebuildsinBournemouth

A stack with crumbling mortar or a lean gets worse every winter it is left. We repoint, repair and rebuild chimneys across Dorset and into Hampshire, to the same standard as the walls below them.

  • Access and scaffolding organised for you
  • Mortar and brick matched to your existing stack
  • 5-year workmanship guarantee
After
Before
BeforeAfter
  • 5★Rated on Google
  • Up to £1mPublic liability insurance
  • NVQ Level 2Qualified bricklayer, CSCS carded
  • 5-yearWorkmanship guarantee

What's Involved

Chimney Repointing and Rebuilds, Explained

A chimney stack takes the worst of the weather, and the mortar between the bricks erodes faster up there than anywhere else on the house. Once it starts letting water in, the damage spreads down into the roof void and the ceilings below. Chimney repointing replaces that failed mortar, joint by joint. Where the stack itself has cracked, leaned or lost bricks, we rebuild the affected courses and finish with new flaunching around the pots. The job is led by Jack, who holds an NVQ Level 2 Diploma in Bricklaying and a current CSCS card, and it suits any Dorset or Hampshire home with a stack showing crumbling mortar, loose brick or a visible lean.

  • Mortar joints repointed to match the original
  • Cracked or leaning courses rebuilt
  • New flaunching laid around the chimney pots
What a repointed chimney stack looks likeChimney Repairs

How We Handle a Chimney Job

From first look to finished stack, in three stages.

5.0★

from 47 Google reviews

5-year

workmanship guarantee

Up to £1m

public liability insurance

1hr

coverage from Ferndown

Chimney Repairs vs Wall and Patio Repointing

Chimney repointing, wall repointing and patio repointing are all repair work on the same house, but they are not the same job. Here is how they differ.

Chimney RepointingWall RepointingPatio Repointing
AccessScaffolding or tower neededGround level, straightforwardGround level, straightforward
Typical triggerCrumbling mortar, loose brick, damp staining insideCracked or eroded pointing on wallsWeeds, loose slabs, eroded joints
Weather exposureHighest point on the house, worst exposureModerate, depends on aspectLow, but joints fail if water pools
When it matters mostBefore winter, once water is getting inOngoing maintenanceBefore it becomes a trip hazard

Swipe to see every column

What's Included as Standard

Every chimney job covers the same ground, whatever the stack needs.

Access and Scaffolding

Safe access to the stack arranged and organised as part of the job.

Mortar Matched to Your Brick

Repointing mixed and finished to match the existing stack, not a patch that stands out.

Cracked or Loose Brick Replaced

Damaged bricks swapped for a matching replacement where the stack needs it.

Flaunching Renewed

The mortar collar around the chimney pots rebuilt where it has cracked or worn away.

Site Kept Clean and Tidy

Work areas protected and the site cleared down each day.

Free Written Quote

A detailed, no-obligation quote before any work starts.

Pricing

What a Chimney Job Costs

Priced After a Visit

Every stack is different: how much mortar has gone, whether bricks need replacing, what access the scaffolding needs. Jack looks at every stack in person before pricing it, not a figure guessed from a photo.

  • What the scaffolding or access will take
  • How much repointing or rebuilding the stack needs
  • Materials matched to your existing brick
Get a Free Quote

Every job comes with a 5-year workmanship guarantee.

How a Chimney Job Runs

The same four stages every job goes through, adapted for working at height.

1. Free Site Visit & Quotation

We visit the property, look at the stack and the access it needs, and provide a detailed written quote.

2. Preparation

Materials are ordered to match your existing brick, a start date agreed, and scaffolding or access arranged.

3. Repointing, Repair or Rebuild

The work is carried out to a high standard, with the site kept clean and tidy each day.

4. Finishing

The work is cleaned down, all waste removed, and we walk you through the completed stack.

What Customers Say

5.0 from 47 Google reviews.

5.047 reviews on Google

Dane Gardner

Jack is a real craftsman who repaired my steps and repointed my patio to a very high standard. From the start he was good at communicating, replying to messages quickly and providing a prompt quote. He was punctual and…

Rosemary Collins

Jack did an excellent job rebuilding a section of our garden wall and repairing cracks in other sections despite having to work through challenging weather conditions and unexpected complications in relation to the groundwork.

A Project Worth a Look

More write-ups are on the way as new jobs complete.

Common Worries, Answered

What people ask before booking chimney work.

  • Will scaffolding be up for weeks?

    Access is arranged for as long as the job needs and no longer. Most repointing and repair jobs don't need it up for an extended stay.

  • Will the stack be exposed to the weather while it's open?

    We plan the work so the stack isn't left open to the weather for longer than it needs to be.

  • What if something goes wrong after you leave?

    Every job is covered by a 5-year workmanship guarantee, so you're not covering a repeat repair out of your own pocket.

What You're Seeing, and What It Means

The most common signs a stack needs attention.

  • Crumbling or missing mortar between the bricks

    Crumbling or missing mortar between the bricks

    What it actually isMortar wears fastest at the top of the house, where the stack takes the worst of the wind and rain.

    What it needsRepointing to match the existing brick.

  • A stack that looks like it is leaning

    A stack that looks like it is leaning

    What it actually isEroded mortar and frost damage, over years, can pull a stack out of true.

    What it needsThe affected courses are rebuilt plumb and true.

  • Damp staining on a ceiling near the chimney breast

    Damp staining on a ceiling near the chimney breast

    What it actually isOften water getting in where the stack meets the roof, at a failed flaunching or open joint.

    What it needsWe repoint and renew the flaunching. Anything to do with flashing or leadwork is outside our scope, and we'll flag it so you can bring in the right trade.

This isn't a safety check of your flue. For anything to do with the flue itself, that's a job for a chimney sweep or a HETAS engineer.

Chimney Repointing and Repairs in Dorset: The Detail

What a chimney repair actually needs varies more than most jobs on the house. A short spell of repointing on an easy-access stack is a different job to a full chimney rebuild that needs scaffolding up and half the courses taken down and relaid. Height, access, how much of the stack has failed and the condition of the existing brick all affect how a job is scoped, which is why we price every chimney job after a visit rather than off a description over the phone.

The most common problem is straightforward. Mortar erodes fastest at the top of the house, where the stack takes the brunt of wind, rain and frost that the rest of the walls are sheltered from. Once the pointing has gone, water gets into the joint, freezes, and starts pushing the brick apart. Left long enough, that turns a simple chimney stack repair into brickwork that needs rebuilding.

Flaunching, the mortar collar around the base of the chimney pots, fails the same way and for the same reason. A cracked or missing flaunching is one of the more common ways water finds its way into a chimney breast, and it is usually put right alongside the repointing rather than treated as a separate job.

Not every stack needs a full chimney rebuild. Where the brick underneath is sound, repointing on its own puts the stack back to a weathertight state. Where bricks have spalled, cracked, or the stack has started to lean, the affected courses are taken down and rebuilt properly, rather than pointed over and left to fail again in a few years.

This is brickwork, and it stays brickwork. We repoint, repair and rebuild the stack itself: the masonry, the joints and the flaunching. We don't sweep chimneys, line flues, or carry out roofing or leadwork, and we won't tell you a stack is safe to use or compliant with building regulations, because that isn't our trade to assess. Where a job needs a chimney sweep, a HETAS engineer or a roofer, we'll say so and point you toward the right trade rather than guess.

Chimney repointing, repair and rebuild work is available across Dorset and into Hampshire, from Bournemouth and Poole out to around an hour's drive from Ferndown.

Chimney Repair Questions, Answered

The questions we get asked most about chimney work.

Can you match my existing brick?

Yes. We match the brick and mortar colour to your existing stack so the repaired sections don't stand out against the rest.

How much does chimney repointing cost?

It depends on the access, the height and how much of the stack needs doing, so we price every chimney job after a visit rather than guess a figure over the phone. Get in touch and we'll arrange a free, no-obligation quote.

Do you sweep chimneys or line flues?

No. We handle the brickwork: repointing, repairing and rebuilding the stack itself. Sweeping, flue lining and any gas work need a specialist, and we're happy to point you toward the right trade if that's what you need.

How long does chimney repointing or a rebuild take?

It depends on how much of the stack needs doing and what access the scaffolding needs. We'll give you a realistic timeframe with your written quote.

Do I need scaffolding for chimney work?

Most stacks need proper access to work on safely, and we arrange that as part of the job rather than leaving it for you to sort.

Get a Free Quote on Your Chimney

Send a few details and photos if you have them, and we'll get back to you with a written quote.

Get a free quote

Tell us what you need and we'll come back with a price. No pressure, no hard sell.

Prefer to talk? Call JFE Brickwork on 01202 028 343

Get a Free Quote